12
EchoNous AI Station 2 User Guide
To adjust swivel tension:
1.
Using a 1/2” socket wrench, tighten or loosen the swivel tension nut until
desired swivel tension is achieved. Socket wrench is not provided.
To adjust tilt tension:
1.
Using a 5/32” Allen wrench, tighten or loosen the tension adjustment screws.
Allen wrench is not provided.
To begin scanning:
1.
Connect Torso/Torso-One into probe port underneath Bridge handle.
2.
Connect Lexsa to the USB-C port on the side of the Bridge.
Be sure to support the tablet while adjusting the tension; if the tension is
too loose, the tablet mount could suddenly tilt down.