3
email - [email protected] (US)
tel - 1-800-477-2267 (US)
email - [email protected] (Europe)
Installation Guide
Fitting Instructions
Choose a mounting location that will not obscure the driver’s view. Also
please ensure that the unit is not mounted in a location that will obstruct the
operation of any airbags.
1. Remove OEM mirror and replace with supplied LCD mirror.
2. Run your wiring harness into the headliner and down the vehicles A-Pillar,
making sure to avoid any factory airbags. Secure your wiring with zip-ties.
3. Make all necessary wiring connections
(See wiring diagram)
MRC-LP01CP
Factory Mount Mirror Monitor
with License Plate Camera (USA)
Installer notes:
This system is completely signal
sensing, there is no “reverse
trigger wire” in the wire harness.
Some vehicles’ reverse lamp wires
are now variable voltage wires,
and may cause a fuzzy or distorted
image or they may not power on
the camera.
If you experience this, please use a relay to power your camera, as shown in
the diagram.
