EchoMaster Pro PS-RBP, User Manual, Page: 6 / 7

11
Installation Guide
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - support@aampglobal.com (US)
email - technical.eu@aampglobal.com (Europe)
10
Installation Guide
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - support@aampglobal.com (US)
email - technical.eu@aampglobal.com (Europe)
PROBLEM REASON SOLUTION
System doesn’t react when
reverse is engaged
System is not powered up or
wrong connection of power
cable
Check the power and
ground connections
Invalid connection between
speaker/display and control
module
Check the connection
between speaker/display
and control module
After activation, system
continuously beeps for 3
seconds
Invalid connection between
sensors and control module
Check the connection
between sensors and
control module
All sensors are defective Replace the defective
sensors
False alarms
Sensors pointing down Change angle sleeve
Sensors rotated Note ‘UP’ marking on
sensor and adjust
accordingly
Troubleshooting
87.3mm /3.4”
74mm /2.9”
28mm/1.1”
14.0mm / 0.55” 26.0mm / 1.0”
21.9mm / 0.9”
14.9mm / 0.6”
21.5mm / 0.8”
26mm / 1.0”
24.2mm / 0.95”
15.0mm/0.9”
460mm/18”
32mm/1.25”
25mm/0.98”
Dimensions (mm/in)
63.7mm / 2.5”
44.8mm / 1.7”
70.2 / 2.8”
2500mm / 98.4”
Specifications
PS-RBP-B/M/W/S - PS-RDIS-B/M/W/S
Operating Voltage Range 10.5 - 16V DC
Rated Voltage 12V DC
Rated Current 400mA
Operating Temperature
-20C - +70C
Waterproof Grade (Sensors & Module) IP67 - Module: IP40
Detection Range 0-1.7m; 0-8.2ft
Harness Length
8 feet
Hole Saw 22.5mm
Angle Sleeves 6 degrees and 12 degrees
PS-RBP/PS-RDIS
ParkAlert Rear Sensor System
with Buzzer or Display
PS-RBP/PS-RDIS
ParkAlert Rear Sensor System
with Buzzer or Display