10
Installation Guide
10
tel - 1-866-766-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
Routing the Camera Cables (continued)
FCTP-GM2003
Trailering Camera System
Step 7
On the outside of the door secure the connector side of the
camera extension cable without the threads to the fish tape
using electrical tape. This will allow us to route the cable
from outside of the door to the inside of the door.
Step 8
Grab the fish tape from inside the vehicle
and pull it and the camera cable through
the rubber membrane so that the cable
end with the threads is still accessible
from the outside.
Step 9
Secure the camera cable to the factory
mirror wiring using one of the supplied zip
ties.
Step 10
Release the rubber grommet from the
door by grabbing and pulling on the
attached tab.
