7
Setting
Indication
High
Green LED blinking
Medium
Amber LED blinking
Low
Red LED blinking
To select a setting press and hold the test button for 6 seconds when the desired
LED is blinking. To exit without saving, allow the test to time-out in 60 seconds or
press the Link button to exit immediately without saving.
Wireless System Layout Hints
• Avoid locating transmitters and receivers on the same wall.
• Avoid locating transmitters and receivers where the telegrams must
penetrate walls at acute angles. This increases the material the telegram
must pass through reducing the signal power.
• Avoid large metal obstructions as they create radio shadows. Place
receivers in alternate locations to avoid the shadow or use repeaters to go
around the obstacle.
• Do not locate receivers close to other high frequency transmitters.
• Leave at least 3’ between the receiver and any other source of interference
including, ballasts, LED drivers, computers, video equipment, Wi-Fi/LAN
routers, GSM modems and monitors.
