8
w/o linked switch
POWER led ON w/relay closed, factory default
w/ linked switch
POWER led- one long blink followed by short blinks
counting the switches linked, repeated.
Occ. Sensor
POWER led-two long blinks followed by short blinks
counting sensors linked.
Wireless Photo Sensor POWER led-three long blinks followed by short blinks
counting sensors linked.
Configuring the ERDRC
There are two methods of configuring parameters in the ERDRC controller.
Simple Tap is a quick method of changing a parameters setting, one at a time.
For accessing the complete set of configuration parameters, use the Smart Click
process on the following pages.
Simple Tap Instructions
Simple Tap uses the switches and sensors that are linked to the ERDRC controller
to set the associated configuration parameters. You must be able to access the
sensors teach button or the switches to perform the simple tap process. If the
sensor is linked to multiple controllers and you do not want to make changes to
all, turn the controllers relay off (lights off) to ignore the Simple Tap changes.
Simple Tap allows you to:
• Enable or disable the motion sensor Auto-ON feature
• Set the motion sensor Auto-OFF timer
• Set the Light ON/OFF or dimming set points
Disable/Enable the Auto-ON feature -
With the light on, tap the occupancy
sensors teach button followed by three quick consecutive clicks of a linked wall
switch ON. To enable Auto-ON, click once more ON, to disable click OFF. The
light will blink once to confirm the change.
Set the Motion Sensor Auto-OFF timer -
With the light on, tap the occupancy
sensors teach button to reset the timer period. There are 6 possible settings
and the number of taps on the button counts the number according to the time
period, see the table below. Level 1 (time out 0 seconds - demo mode) is set by
tapping 3 times, consecutive taps up to a maximum of 8 taps is Level 6 (time
out 25 minutes).The relay/light will blink once on the third tap and then begin
counting the level set after 3 seconds.
Taps
Occ.Sensor Timer
Light Blinks
3 taps*
0 sec.
1 blink
4 taps
5 min.
2 blinks
5 taps
10 min
3 blinks
6 taps
15 min
4 blinks
7 taps
20 min
5 blinks
8 taps
25 min
6 blinks
* for demonstration purposes only
