Page 6
ELEDR(H) Installation Guide
CLEAR button
Using the CLEAR button can reload the controller to the factory pre-
commissioned settings with linked devices or it can load the factory default
parameters and remove all linked devices.
• To return the controller to the factory pre-commissioned state, press
the CLEAR button until the POWER and LEARN LEDs start blinking,
approximately 5 seconds. Release the button and the POWER LED will
begin blinking indicating the factory commissioned pre-linked devices.
• To completely clear the controller returning it to factory default settings
removing all linked devices, press the CLEAR button until the POWER
and LEARN LEDs come on solid, about 15 seconds, then release. The
POWER LED will stay ON solid indicating the factory default state.
Power Load Controller
Power
LED
Clear
Button
Learn
Button
Learn
LED
LED Driver
Battery Backup
Normal Hot
Normal Neutral
Load Control
LED +
LED -
LED +
LED -
LED
Emmitter
Neutral
Wiring Diagrams - For use in Emergency Fixtures
(2 of 2)
Wiring Diagrams - For use in Emergency Fixtures
(1 of 2)
Power Load Controller
Power
LED
Clear
Button
Learn
Button
Learn
LED
Normal Hot
Load
Normal Neutral
Emergency Hot
Emergency
Neutral
Normal Control Sense
Normal
Emergency
Load
Neutral
Hot
UL924 Emergency
Bypass Relay
with appropriate
voltage rating
