Echoflex Installation Guide
Tunable White Dimming Controller
Tunable White Dimming Controller
Page 6 of 8
Echoflex
Controller Interface
The controller interface has two tricolor LEDs and two buttons.
Tricolor LEDs
The Power and Learn LEDs can display red, green, or blue. LED color and
combinations indicate which of the three channels is providing information
via blink codes or is in an operational mode. See
.
• Red - Channel 1 - dimming output.
• Green - Channel 2 - tunable white output.
• Blue - Channel 3 - external setpoint input.
Learn Button
The
[Learn]
button initiates Link mode for linking switches or sensors in
each of the controller’s channels. See the relevant switch or sensor
documentation for information on linking. Link mode times out after 30
seconds of inactivity.
Repeating the linking process for a device that is already linked to a
controller will unlink it from that controller.
Clear Button
The
[Clear]
button resets the controller either to its pre-commissioned state
or to its factory default state.
To reset to pre-commissioned state:
1. Press the
[Clear]
button until the Power and Learn LEDs start blinking.
2. Release the
[Clear]
button. The LEDs repeat a blink code by color to
indicate the type and number of devices linked to each channel at pre-
commissioning.
To reset to factory default state:
1. Press and hold the
[Clear]
button until the Power and Learn LEDs start
blinking. Continue to hold for 15 seconds until the LEDs turn solid.
2. Release the
[Clear]
button. The Power LED displays solid red to indicate
factory default state. All links are removed.
Test the Controller
Echoflex provides the controller in either a pre-commissioned state or a
factory default state.
• Pre-commissioned devices are linked, configured, and labelled
according to customer specifications. When powered up, the LEDs
repeat a blink code by color to indicate the type and number of
devices currently linked to each channel. See
