Chapter 2
General information about using
AUDI
O
SCHOOL
2.1
Initial Start-up of the device
2.1.1
Powering up / starting
The device can be turned on without any other device connected.
Turn on the device using the switch on top of the device (if it does not start, make sure the device battery is charged)
2.1.2
Touch screen calibration
During the first start-up, a calibration step of the touch
screen is necessary. The following window appears:
This is a five-point calibration of the screen. Simply
hold the stylus down on the crosses in the centre of each
of the circles that appear in succession.
2.1.3
Password
After the screen has been calibrated, the password setting windows appear. If you choose to set a password, you will
be asked for it every time you start the device. To do this, click on "Lock device with password" and then set your
password by clicking on "Change password". The password must be between 1 and 15 characters long, and you will be
asked twice to ensure that you have entered it correctly.
You can access the password configuration window later from the "Config" menu and then "System". This window
allows you to change the password, but also to activate or deactivate the lock. If you forget your password, please contact
Electronique du Mazet to receive an unlock code.
Calibration is important for user comfort. It is strongly recommended to perform it by placing the device
on a table and using the stylus.