background image

G

RASS

 T

RIMMER

/B

RUSH

 C

UTTER

O

PERATOR

'

S

 M

ANUAL

19

STOPPING

 

ENGINE

1.

Release Throttle.

Allow engine to return to idle before shutting off engine.

2.

Stop Switch

Move stop switch button (A) backward to STOP position.

WARNING  

  DANGER

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using trimmer
again.

M

AINTENANCE

Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance.  To help you decide whether you want to DO-IT-YOURSELF or have the
ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Dealer for repairs.

SKILL

 

LEVELS

Level

 

1

 =

Easy to do. Most required tools come with unit.

Level

 

2

 =

Moderate difficulty. Some specialized tools may be required.

Level

 

3

 =

Experience required. Specialized tools are required. ECHO recommends that
the unit be returned to your ECHO dealer for servicing.

ECHO offers 

REPOWER

TM

 Maintenance Kits and Parts to make your maintenance job easier. Below each task heading

are listed the various part numbers required for that task. See your ECHO dealer for these parts.

A

Summary of Contents for TRIMMER ATTACHMENT SRM-261SB

































Reviews: