![background image](http://html1.mh-extra.com/html/echo/trimmer-attachment-srm-261sb/trimmer-attachment-srm-261sb_operators-manual_4061884013.webp)
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERATOR
'
S
M
ANUAL
13
PLASTIC
SHIELD
INSTALLATION
(for Nylon Line Operation)
Tools Required:
Screwdriver.
Parts Required:
Plastic Shield, Shield Plate, three (3) 5mm x 15mm
screws.
NOTE
The plastic shield is for use with the Nylon Line Head only.
Install Metal Shield when using plastic or metal blades.
1. Remove plastic threaded shaft sleeve and adapter plate (C) from PTO
shaft (A).
2. Place the shield on the bottom of the bearing housing flange.
3. Place shield plate (B) on shield, align holes. Install three (3) screws
from bottom through plate and shield into gearcase.
4. Assemble adapter plate (C) onto PTO shaft.
NYLON
LINE
HEAD
INSTALLATION
A
B
C
D
Tools Required:
Head Locking Tool,
Parts Required:
Nylon Line Head.
1. Be sure adapter plate (C) remains on PTO shaft.
2. Align locking hole in upper plate with notch in edge of gear housing
and insert head locking tool (D).
3. Thread line head onto shaft by turning it counter clockwise until
head is tight against adapter plate (C).
4. Remove locking tool.
FRONT
HANDLE
INSTALLATION
Tools Required:
Screwdriver.
Parts Required:
Front Handle Assembly
1. Position front handle for comfortable operation and secure screws.