ENGLISH
• ALWAYS
use adjustment handle to hold
blade assembly when making adjustments.
• ALWAYS
lock blades securely in position
before lifting unit off ground.
• ALWAYS
check cutting area for hidden wires,
fence posts, and other obstacles before
starting.
• ALWAYS
maintain a line of sight to the
cutting area.
• ALWAYS
use extreme care when cutting
overhead.
PAS POWER PRUNER ATTACHMENT
DANGER
Saw chain teeth are very sharp and can cause
severe injuries, even if engine is off and chain
is not moving. Avoid contact with saw chain.
Wear gloves to protect hands.
KICKBACK HAZARDS
Contact between the tip of the guide bar nose and
objects such as tree limbs and branches can cause
Kickback. Kickback is a sudden, forceful reaction
that throws the guide bar and saw chain up and
away from the point of contact, and in an arc back
toward the operator.
Kickback can also occur when the moving saw
chain gets pinched in the cut, pushing the unit
straight back toward the operator with a sudden,
forceful reaction.
Kickback can result in loss of balance, loss of
unit control, and serious injury from contact with
moving saw chain, or contact between the unit and
surrounding hazards.
ROTATIONAL
KICKBACK
CHAIN MOVING
DOWNWARD AT IMPACT
Kickback
Open blades on
ground only with
engine stopped.
40
OPERATION
Summary of Contents for SRM series
Page 50: ...ENGLISH NOTES 50...
Page 51: ...ENGLISH NOTES 51...
