24
Bevor Sie beginnen
Montage des Schutzhalters
Befestigen Sie den Schutzhalter am Winkelgetriebe, indem Sie
die Befestigungsplatte von unten gegendrücken und die
4 Schrauben (M5×25) leicht anziehen.
Richten Sie die Kerbe und den Fixierpunkt der
Befestigungsplatte auf das entsprechende Gegenstück des
Schutzhalters aus, und ziehen Sie die 4 Schrauben (M5×25) fest.
Wechseln des Schutzschildes
Entfernen Sie die Schraube (M5×18) an der rechten Seite des
Schutzschilds, schieben Sie den Schutzschild nach links, und
nehmen Sie ihn ab. Schieben Sie den anderen Schutzschild in
der Führung nach rechts bis zum Anschlag, und sichern Sie ihn
mit der Schraube (M5×18).
Wenn Sie mit dem Nylonfadenkopf arbeiten, verwenden Sie den
Schutzschild für den Nylonfadenkopf (siehe Seite 19 im Abschnitt
„Rundgriff-Version19"). Befestigen Sie das Fadenschneidmesser
mit der Schraube (5×12) am Schutzschild für den
Nylonfadenkopf.
Montage des Messers
Kontrollieren Sie die Messer vor der Montage. Überprüfen Sie die
Schärfe Bei stumpfen Messern erhöht sich das Risiko eines
Rückschlags. Kleine Risse können sich zu Brüchen entwickeln,
so dass Teile des Messers während des Betriebs
weggeschleudert werden.
Entsorgen Sie gerissene Messer, egal, wie klein der Riss ist.
Stekcen Siei obere Druckplatte, Messer, untere Druckplatte und
Auflageteller zusammen und ziehen Sie die Mutter handfest an.
1. Schutzhalter
2. Schraube M5x25
3. Fixierungspunkt der
Befestigungsplatte
4. Befestigungsplatte
5. Fixierungspunkt der
Befestigungsplatte
1. Schutzhalter
2. Schutzschild (für
Metallmesser)
3. Schraube M5×18
1. Arretierungsloch der
Fixierplatte
2. Obere Druckplatte
3. Messer
4. Untere Fixierplatte
5. Auflageteller
6. Mutter
GEFAHR
Bei Verwendung von verschlissenen Muttern und
Auflagetellern zur Befestigung des Messers besteht die
Gefahr, dass sich das Messer lockert. Ersetzen Sie diese
Teile durch neue.
Summary of Contents for SRM-510ES
