G
rass
T
rimmer
/B
rush
C
uTTer
O
peraTOr
'
s
m
anual
25
1. Cut one piece of line to recommended length.
.080 (2.0 mm) dia. – 10’ (3 m)
.095 (2.4 mm) dia. – 10’ (3 m)
nylon
lIne
replacement
2. Align arrows on top of knob with openings in eyelets.
3. Insert one end of trimmer line into an eyelet, and push line equal
distance through trimmer head.
4. Hold trimmer head while turning knob clockwise to wind line onto
spool until about 5” (13 cm) of each line remains exposed.
Trimmer head is now fully loaded and ready for operation.
