25
Wartung und Pflege
Überprüfen des Kraftstoffsystems
Überprüfen Sie diesen Punkt vor jeder Verwendung.
Vergewissern Sie sich nach jeder Betankung, dass kein
Kraftstoff an den Leitungen (A), Dichtungen (B) oder am
Tankdeckel (C) austritt.
Wenn Kraftstoff oder Kraftstoffdämpfe austreten, besteht
Brandgefahr. Schalten Sie das Gerät in diesem Fall sofort aus,
und lassen Sie es von Ihrem Händler überprüfen bzw.
austauschen.
Überprüfen der Zündkerze
1. Prüfen Sie den Elektrodenabstand. Der korrekte Abstand
beträgt 0,6 bis 0,7 mm.
2. Prüfen Sie die Elektrode auf Verschleiß.
3. Prüfen Sie den Isolierkörper auf Öl- oder andere
Ablagerungen.
4. Wenn die Zündkerze schmutzig ist, reinigen. Dafür keinen
Sandstrahl verwenden. Durch den verbleibenden Sand wird
der Motor beschädigt.
5. Wenn die Elektroden oder Kontakte verschlissen sind oder
die Keramikteile Risse aufweisen, ersetzen Sie sie durch
neue Teile. (Siehe Technische DatenSeite 30)
6. Auf 15 N·m - 17 N·m (150 kgf·cm bis 170 kgf·cm) festziehen.
Die Funkenprüfung (zur Feststellung, ob die Zündkerze einen
Zündfunken wirft) muss von Ihrem Händler durchgeführt
werden.
Schmieren der Antriebswelle
Überprüfen Sie die Antriebswelle (A) alle 100 Betriebsstunden,
und schmieren Sie sie, falls erforderlich.
Winkelgetriebe
1. Bauen Sie den Stopfen (A) und die Ablassschraube (B) aus
dem Winkelgetriebe (C).
2. Füllen Sie das Getriebe mit so viel neuem Schmierfett, bis
das alte Schmierfett herausgedrückt wird. Verwenden Sie
bei Bedarf eine Niederdruckpumpe.
3. Bauen Sie die Ablassschraube und den Stopfen wieder ein.
a: 0,6 - 0,7 mm
HINWEIS
Verwenden Sie ein hochwertiges Lithium-Mehrzweckfett.
HINWEIS
Verwenden Sie ein hochwertiges Lithium-Mehrzweckfett.
Summary of Contents for SRM-222ES
