H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
23
S
TORAGE
WARNING
DANGER
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear
of flammable debris during transportation or when storing, otherwise serious personal injury may result.
Long Term Storage (over 30 days)
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte-
nance which includes the following:
1.
Store unit in a dry, dust free place, out of the reach of children.
WARNING
DANGER
Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark, otherwise serious
personal injury may result.
2.
Place the stop switch in the "OFF" position.
3.
Remove accumulation of grease, oil, dirt and debris
from exterior of unit.
4.
Perform all periodic lubrication and services that are
required.
5.
Tighten all the screws and nuts.
6.
Drain the fuel tank completely and pull the recoil
starter handle several times to remove fuel from the
carburetor.
7.
Remove the spark plug and pour 7 cc (1/4 oz.; 1/2
tablespoon) of fresh, clean, two-stroke engine oil into
the cylinder through the spark plug hole.
A.
Place a clean cloth over the spark plug hole.
B.
Pull the recoil starter handle 2-3 times to
distribute the oil inside the engine.
C.
Observe the piston location through the spark
plug hole. Pull the recoil starter handle slowly
until the piston reaches the top of its travel and
leave it there.
8.
Install the spark plug (do not connect spark plug
cable).
IMPORTANT
Always store and transport Shaft Hedge Clipper in a
stable, horizontal position. Support gear case and
cutting blades to prevent excessive flexing, which may
cause damage to the cutting attachment.
Summary of Contents for SHC-2100
Page 2: ......
