background image

H

EDGE

 C

LIPPER

O

PERATOR

'

S

 M

ANUAL

3

INTERNATIONAL

 

SYMBOLS

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Hot

Surface

Carburetor

adjustment
- Idle speed

Carburetor

adjustment

- High speed

mixture

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Read and

understand

Operator's Manual.

Wear eyes, ears

and head

protection

Emergency stop

Fuel and oil

mixture

Finger Severing

Carburetor

adjustment

- Low speed

mixture

Safety/Alert

Do not operate

closer than 15 M

(50 ft.) from

electrical

hazards.

Keep bystanders

at least 15 meters

(50 feet) away.

Plan retreat path

from falling

objects.

Wear hand

protection. Use

two handed.

DO NOT smoke

near fuel.

DO NOT allow

flames or sparks

near fuel.

Wear slip

resistant foot

wear.

Ignition

ON/OFF

Primer bulb

Avoid all power

lines. This unit is

not insulated

against electrical

current.

Choke Control

"Cold Start"

Position

(Choke Closed)

Choke Control

"Run"

Position

(Choke Open)

S

AFETY

MANUAL

 

SAFETY

 

SYMBOLS

 

AND

 

IMPORTANT

 

INFORMATION

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages
preceded by symbols or key words.  The following is an explanation of those symbols and key words and what they
mean to you.

   WARNING

The safety alert symbol accompanied by the
word “WARNING” calls attention to an act or
condition which CAN lead to serious personal
injury or death if not avoided.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action
shown is prohibited. Ignoring these
prohibitions can result in serious or fatal
injury.

   CAUTION

The safety alert symbol accompanied by the
word “CAUTION” calls attention to an act or
condition which may lead to minor or moderate
personal injury if not avoided.

NOTE
This enclosed message provides tips for use, care
and maintenance of the unit.

IMPORTANT
The enclosed message provides information neces-
sary for the protection of the unit.

   DANGER

The safety alert symbol accompanied by the
word “DANGER” calls attention to an act or
condition which WILL lead to serious personal
injury or death if not avoided.

Summary of Contents for SHC-210





























Reviews: