H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
19
STOPPING
ENGINE
(
SHC
UNITS
)
1.
Release Throttle. Allow engine to idle for a minute
2.
Ignition Switch - STOP. Move ignition switch toggle/slide switch
to STOP position.
NOTE
SHC-1700, 2100 with front handle interlock will automatically shut
unit off when released.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using hedge
clipper again or serious personal injury may result.
STOPPING
ENGINE
(
HCA
-
2400
)
1. Release Throttle. Allow engine to idle down and blades stop
moving with throttle trigger disengaged.
2. Release "Idle Start Interlock - Move "Ignition Switch" to STOP
position.
WARNING DANGER
The engine does not stop when idle start lever is released and
throttle trigger is engaged. Release throttle trigger and allow engine
to idle down and blades stop moving before releasing idle start
interlock lever, otherwise serious personal injury may result.
WARNING DANGER
If engine does not stop during step 2, close choke - COLD START
position - to stall engine. Have your ECHO dealer repair Stop
Switch before using hedge clipper again or serious personal injury
may result.
