Echo ProThatch 99944200563 Operator'S Manual Download Page 6

6

equIpmenT

  WARNING  

Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment 

combined with a non approved ECHO product. 

Before operation a complete check of the unit must be performed;

•  Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.                                         

•  Inspect ProThatch tines  for damage and that they are firmly secured in place. Replace tines if damaged or missing.           

•  Check that the dethatcher attachment is firmly attached and in safe operating condition.

 WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.     

• 

ALWAyS

 stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop  

before removing obstructions, clearing debris, or servicing unit.

• 

DO NOT

 start or operate unit unless all guards and protective covers are properly assembled to unit.

• 

NEVER

 reach into any opening while the engine is running.  Moving parts may not be visible through openings.

NOTE

ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not 

been tested and approved by ECHO. 

d

esCrIpTIon

Locate this safety decal on  your attachment. Make sure the decal is legible and that you understand and follow the 

instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer.  See PARTS ORDERING 

instructions for specific information.

Summary of Contents for ProThatch 99944200563





















Reviews: