P
ro
T
haTch
a
TTachmenT
o
PeraTor
'
s
m
anual
11
IMPORTANT
Do not rotate wheels against tines. Wheels and tines will be dam-
aged during operation.
If wheel rotation is not sufficient to provide proper wheel height clear
-
ance then perform these additional steps:
4. Loosen two upper wheel bracket bolts (C).
5. Slide fender/wheel assembly up drive shaft housing until proper
wheel clearance is achieved. Tighten hex head bolts (C).
fronT
j
-
handle
adjusTmenT
Parts Required:
None
1. Loosen two (2) J-Handle bracket bolts (A).
2. Rest dethatcher tines on flat surface. Stand to left side of drive
shaft housing with right hand on throttle grip and left hand on
J-Handle.
3. Move J-Handle up or down drive shaft housing for comfortable
operating position. Tighten J-Handle bracket bolts (A).
C
A
A
