![background image](http://html1.mh-extra.com/html/echo/ppt-2620h/ppt-2620h_operators-manual_4063932025.webp)
PPT-2620 / H
OPERATION
X7502346700
25
© 11/23 ECHO Incorporated
◆
Inspect for fuel leakage. If fuel leakage is found, do not
start or operate unit until leakage is repaired.
◆
Use caution when handling fuel. Mix and pour fuel
outdoors where there are no sparks and flames. Slowly
remove the fuel cap only after stopping the engine and
allowing the unit to cool. Do not smoke while fueling or
mixing fuel. Move the unit at least 10 feet (3 m) from the
fueling point before starting the engine.
Gasoline vapor is heavier than air, and can travel along the
ground to nearby sources of ignition such as electrical motors,
pilot lights, and hot or running engines. Vapors ignited by an
ignition source can flash back to the fuel container, resulting in
an explosion, fire, serious or fatal injuries, and extensive
property damage.
Mixing Instructions
Stored fuel ages. Do not mix more fuel than you expect to use in 30
days, 90 days when a fuel stabilizer is added.
1.
Fill an approved fuel container
with half of the required
amount of gasoline.
2.
Add the proper amount of
2-stroke oil to gasoline.
3.
Close container and shake to
mix oil with gasoline.
4.
Add remaining gasoline, close
fuel container, and remix.
Spilled fuel is a leading cause of hydrocarbon emissions. Some
locations may require the use of automatic fuel shut-off containers to
reduce fuel spillage.
Fuel to Oil Mix – 50:1 Ratio
US
Metric
Gas
Oil
Gas
Oil
gal.
fl.oz.
L
cc
1
2.6
5
100
2
5.2
10
200
5
13
25
500