background image

P

OWER

 P

RUNER

TM

O

PERATOR

'

S

 M

ANUAL

5

  

  DANGER

All over head electrical conductors and communications wires can
have electricity flow with high voltages. This unit is not insulated
against electrical current. Never touch wires directly or indirectly
when pruning, otherwise serious injury or death may result.

  

  WARNING

Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can cause
serious injury or death.

Read the Manuals
• Provide all operators of this equipment with the Operator's Manual,

and instructions for safe operation.

Clear the Work Area
• Spectators and fellow workers must be warned, and children and

animals prevented from coming nearer than 15 m (50 ft.) while the unit
is in use.

Use Proper Clothing & Equipment
• Always wear head protection with full face shield to help protect

against falling branches and debris.

Keep A Firm Grip
• Grip Power Pruner

TM

 with both hands with thumbs and fingers

encircling the handle, and shaft tube.

Repetitive Stress Injuries

It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness,
swelling, numbness, weakness and extreme pain in those areas.  Certain repetitive hand activities may put you at a high
risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which
could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged
exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following:
• Avoid using your wrist in a bent, extended or twisted position.

Instead try to maintain a straight wrist position.  Also, when grasping,
use your whole hand, not just the thumb and index finger.

• Take periodic breaks to minimize repetition and rest your hands.
• Reduce the speed and force with which you do the repetitive move-

ment.

• Do exercises to strengthen the hand and arm muscles.
• Immediately stop using all power equipment and consult a doctor if

you feel tingling, numbness or pain in the fingers, hands, wrists or
arms. The sooner RSI/CTS is diagnosed, the more likely permanent
nerve and muscle damage can be prevented.

Summary of Contents for PPT-260 - 02-07 1

































Reviews: