30
10. Assemble engine/lower adaptor assembly in position at housing
end and engage power transmission shaft end (E) into engine
clutch drum PTO.
11. Check upper adaptor cap (D) for correct placement of "O" ring
half. Assemble cap onto the shaft tube locating power transmis-
sion shaft ball bearing (I) into adaptor body and cap groove.
Assemble four (4) screws (C). Rotate shaft tube to correctly
position rear handle then tighten screws maintaining equal upper
and lower adaptor half side gap spacing.
12.
Align ridges on aluminum shaft tube (J) with seams in cutting
attachment. Join star shaped drive end of inner power transmis-
sion shaft (A) with cutting attachment shaft (F).
13.
Slide together aligning locating screw (B) in cutting attachment
with locating hole in aluminum shaft tube.
14.
Tighten locator screw (B) and four (4) cutting attachment screws
(A).
B
H
K
A
J
J
I
D
E
C