P
OWER
P
RUNER
TM
O
PERATOR
'
S
M
ANUAL
11
HANDLE
SHAFT
/
POWER
HEAD
1. Remove protective cap from drive shaft end.
2. Loosen two (2) clamping screws (A) and remove locating screw
(B).
3XOOÀH[LEOHGULYHVKDIWFRXSOHULQRXWRIGULYHVKDIWDVVHPEO\
$OLJQÀH[LEOHGULYHVKDIWFRXSOHUZLWKHQJLQHVRFNHWDQGVOLGH
together until locating hole in shaft is visible through locating hole
in engine housing.
5. Install locating screw and tighten clamping bolts.
A
B
$OLJQÀH[LEOHGULYHVKDIWFRXSOHUZLWKGULYHVKDIWVRFNHWDQGVOLGH
together until handle shaft is fully seated into drive shaft.
5. Tighten clamping bolts (A).
A
Summary of Contents for Power Pruner PPT-265ES
Page 32: ...32 NOTES...
Page 33: ...POWER PRUNERTM OPERATOR S MANUAL 33 NOTES...
Page 34: ...34 NOTES...
