P
ower
P
runer
TM
o
PeraTor
'
s
M
anual
9
1
2
8
7
3
4
5
6
9
10
11
12
P/N X505001821
13
1.
POWER hEAD
- Includes the Engine, Clutch, Fuel System, Ignition System and Starter.
2.
REAR hANDLE AssEMbLy
- Rear (right hand) handle.
3.
ThROTTLE TRIGGER LOCKOUT
- This lever must be held during starting. Operation of the throttle trigger is
prevented unless throttle trigger lockout lever is engaged.
4.
sTOP sWITCh
- Mounted on top of rear handle assembly. Move switch forward to run, back to stop.
5.
sTRAP hOOK -
Used to secure unit to shoulder harness.
6.
FRONT hANDLE
- Cushioned grip for left hand.
7.
CUTTING ATTAChMENT -
Sealed, gear ratio is 1.5:1 reduction.
8.
AUTOMATIC OILER AssEMbLy -
Self oiling. Use high quality, low viscosity, non detergent bar and chain oil.
9.
GUIDE bAR
-
305 mm (12 in.) guide bar.
10.
sAW ChAIN
- 90, 9.53mm (3/8 inch) pitch, 0.043 gauge low profile Oregon® saw chain. Runs approximately
609.6 m/min. (2000 ft/min) at full throttle.
11.
CUTTING shOE
- Used to capture and stabilize branch while cutting. Place cutting shoe against branch, acceler-
ate and lower saw chain into branch.
Summary of Contents for Power Pruner PPF-280
Page 37: ...Power PrunerTM Operator s Manual 37 notes ...
Page 38: ...38 notes ...