OPERATION
DPPT-2600H
32
X7508310101
© 01/24 ECHO Incorporated
When power to unit is turned on:
• After 90 seconds of inactivity, unit will power itself off.
• If power indicator LED remains lit, operation is normal.
• If power indicator LED flashes once per second, the battery needs to be
charged.
• If power indicator LED flashes four times per second, there is a fault
within the product. Turn power off to unit. Remove battery. Clear debris
from around cutting attachment. Install battery. Turn power on to unit. If
flashing continues, have your authorized servicing dealer repair the
product.
Stopping Unit
The cutting attachment continues to run for a short period after
the unit is switched off.
1.
Release power switch and
allow cutting attachment to
stop.
2.
Push enable button (A) to
turn off power to unit.
• Power indicator LED (B) turns
off when power to unit is
turned off.
• If the unit does not stop when
power switch and operator
presence switch are released,
push enable button to turn off and remove the battery to stop the power
supply to product. Have your authorized servicing dealer repair unit
before using product again.
