Echo Power Blend TC-210, Operator'S Manual

Page: 30 / 44

MAINTENANCE TC-210
30 X7504083609
© 4/2016 ECHO Inc.
1. Remove starter cover and cylinder
cover.
2. Remove exhaust guide (A), gasket (B),
and screen (C) from muffler body.
3. Clean carbon deposits from muffler
components.
Note: When cleaning carbon deposit,
be careful not to damage the
catalytic element inside muffler.
4. Replace screen if it is cracked, plugged, or has holes burned through.
5. Assemble components in reverse order.
Exhaust Port Cleaning
Level 2.
1. Remove spark plug lead from spark
plug, and remove engine cover.
2. Place piston at top dead center.
Remove muffler (A) and heat shield
(B).
3. Use a wood or plastic scraping tool to
clean deposits from cylinder exhaust
port.
Never use a metal tool to scrape carbon from the exhaust port. Do
not scratch the cylinder or piston when cleaning the exhaust port.
Do not allow carbon particles to enter the cylinder.
4. Inspect heat shield, and replace if
damaged.
5. Install heat shield and muffler.
6. Tighten muffler mounting bolts (or
nuts) to 90-110 kgf•cm (80-95 in•lbf).
7. Install engine cover and attach spark
plug lead.
8. Start engine, and warm to operating
temperature.
9. Stop engine, and re-tighten mounting bolts (or nuts) to specifications.
Parts Required: Heat Shield
B
A
C
A
B