background image

8

For safe use of your product

Handling the engine

 WARNING

Starting the engine

Be particularly careful to observe the following precau-
tions when starting the engine:



Check that none of the nuts and bolts are loose



Check that there are no fuel leaks



Do not try to start the engine with the product shoul-
dered



Place the product in a flat, well ventilated place



Leave plenty of space around the product and do not al-
low people or animals near it



Remove obstructions, if any



Start the engine with the throttle lever in the start/oper-
ation position



Hold the product firmly to the ground when starting the 
engine

‹

Failure to observe the precautions could cause an accident 
or injury, or even lead to a fatality.

Once the engine has started, check for abnormal vi-
brations and sounds



Check that there are no abnormal vibrations or sounds 
once the engine starts. Do not use the product if there 
are abnormal vibrations or sounds. Contact your ECHO 
DEALER to have it repaired.

‹

Accidents involving parts that fall or shatter off can cause 
wounds or serious injury. 

Do not touch high temperature or high voltage com-
ponents while the product is running

Do not touch the following high temperature or high volt-
age components while the product is running or for some
time after it stops.



Silencer, cylinder, and other high tempera-
ture components

‹

You could burn yourself if you touch a high 
temperature component.



Spark plug, spark plug wire, and other 
high voltage components

‹

You could receive an electric shock if you 
touch a high voltage component while the 
product is running.

Put safety first in the case of fire or smoke



If fire comes from the engine or smoke appears from 
any area other than the exhaust vent, first distance 
yourself from the product to ensure your physical safe-
ty.



Use a shovel to throw sand or other such 
material on the fire to prevent it from 
spreading, or put it out with a fire extin-
guisher. 

‹

A panicked reaction could result in the fire and 
other damage becoming more extensive. 

Exhaust fumes are toxic



The exhaust fumes from the engine contain toxic gases. 
Do not operate the product indoors or in a plastic green-
house or in other ill ventilated places.

‹

The exhaust fumes could cause poisoning.

Turn off the engine when checking or maintaining
the product

Observe the following precautions when checking and
maintaining your product after use: 



Turn the engine off and do not attempt to check or main-
tain the product until the engine has cooled 

‹

You could burn yourself.



Remove the spark plug cap before performing checks 
and maintenance

‹

An accident could occur if the product starts unexpectedly.

Checking the spark plug

Observe the following precautions when checking the
spark plug.



If the electrodes or terminals are worn, or if there are 
cracks in the ceramics, replace them with new parts.



The spark test (for checking whether the spark plug is 
sparking) must be carried out by a professional. Please 
ask your ECHO DEALER.



The spark test must not be carried out in proximity of 
the spark plug hole.



The spark test must not be performed in places where 
there are fuel spills or inflammable gases



You must not touch the 
metal parts of the spark 
plug

‹

The spark plug could ig-
nite a fire or give you an 
electric shock.

Summary of Contents for PB-770





























Reviews: