Echo PB-770 Operator'S Manual Download Page 20

Page: 20 / 28

Maintenance and care

Servicing guidelines

Maintenance and care

Cleaning air filter

Tools required: 25-50 mm (1-2 in.) Cleaning brush
Parts required: Air filter

Move choke lever to

position. This prevents dirt from en-

tering the carburettor throat when the air filter is removed.
Brush accumulated dirt from air cleaner area.

Remove air filter cover. Brush dirt from inside cover.

3. Remove air filter and element plate, and then lightly brush

debris from them. Replace filter if it is damaged, fuel soaked,
very dirty, or the rubber sealing edges are deformed.

4. If filter can be reused, be certain it:

Fits tightly in the air filter cavity.

Is installed with the original side out.

5. Install air filter cover.

Area

Maintenance

Page

Before use

Monthly

Air filter

Inspect/Clean/Replace

•

Fuel filter

Inspect/Replace

•

Spark plug

Inspect/Clean/Adjust/Replace

•

Carburettor

Inspect

•

Cooling system

Inspect/Clean

•

Exhaust system

Inspect/Tighten/Clean

•

Starter

Inspect

•

Fuel system

Inspect

•

Screws, bolts and nuts

Inspect/Tighten/Replace

•

IMPORTANT

Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.

If you have any questions or problems, please contact your ECHO DEALER.

1. Air filter cover
3. Element plate

2. Air filter

Summary of Contents for PB-770





























Search results

Summary of Contents for PB-770

Reviews:

Related manuals for PB-770

Brands by name

Popular brands

Echo PB-770, Operator'S Manual

Search results

Summary of Contents for PB-770

Reviews:

Related manuals for PB-770

Brands by name

Popular brands