background image

PB-760 LN H/T

INTRODUCTION

X7531125002

3

© 03/2013 ECHO Inc.

INTRODUCTION

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and 
on-the-job dependability. Read and understand this manual.  You will find it easy to use and full of helpful 
operating tips and SAFETY messages.

The Operator’s Manual

Keep it in a safe place for future reference. Contains specifications and information for safety, operation, 
maintenance, storage and assembly specific to this product.

SERVICING INFORMATION

Parts/Serial Number

Genuine ECHO Parts and ECHO REPOWER™ Parts and 
Assemblies for your ECHO products are available only from an 
Authorized ECHO Dealer. When you do need to buy parts 

always

 

have the Model Number and Serial Number of the unit with you. You 
can find these numbers on the engine housing. For future reference, 
write them in the space provided below.

Model No. _________________ SN. ___________________

Service

Service of this product during the warranty period must be performed by an Authorized ECHO Service 
Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or 
call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your 
unit for Warranty service/repairs, proof of purchase is required.

Echo Consumer Product Support

If you require assistance or have questions concerning the application, operation or maintenance of this 
product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:30 am to 
4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial 
number of your unit.

Warranty Registration

To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at 
www.echo-usa.com or by filling out the warranty registration card supplied with your unit. Registering your 
product confirms your warranty coverage and provides a direct link between you and ECHO if we find it 
necessary to contact you.

Additional or Replacement Manuals

Replacement Operator, Safety Manuals, and Parts Catalogs

 are available from your ECHO dealer or at 

www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 
(800-673-1558). Always check the ECHO Web Site for updated information.

Safety Videos

 are available from your Echo dealer. A $5.00 shipping charge will be required for each video.

Summary of Contents for PB-760 LN H/T





































Reviews: