PB-760 LN H/T
ASSEMBLY
X7531125002
15
© 03/2013 ECHO Inc.
PB-760 LN T
Never perform maintenance or assembly procedures with engine running or serious personal injury
may result.
Install Blower Pipes
1. Place guide loop (G) across clamp, and turn until clip fully
engages clamp band.
Note: Clamp with cable guide loop (G) fits elbow end of flexible
pipe (B).
2. Assemble clamps (A) onto both ends of flexible pipe (B).
3. Assemble swivel pipe (C) into flexible pipe (B) and tighten
clamp (A).
Note: Hang handle freely from blower to assure throttle cable is
not twisted before installing handle (E).
4. Loosen knob (H) on handle (E). Align notch in handle with
tabs (F). Install onto swivel pipe (C) past long ridges in pipe.
5. Assemble flexible pipe (B) to elbow (D) on blower. Position
guide loop (G) on outside of flexible pipe (away from blower)
and tighten clamp (A).
G
G
A
G
B
A
C
E
H
F
C
D
G
A
B
