background image

10

NOTICE:

 Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor

performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage
section of this manual.

FUEL

 WARNING

Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements
are 

NOT

 approved for use in ECHO 2-stroke gasoline engines.  Use of alternative fuels may cause performance

problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited
to, improper clutch engagement.  Alternative fuels may also cause premature deterioration of fuel lines, gaskets,
carburetors and other engine components.

Fuel Requirements

GGasoline - 

Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain

up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood
alcohol) is 

NOT

 approved.

Two Stroke Oil - 

A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD Standards must

be used. Echo brand premium Power Blend X 

TM

 Universal 2-Stroke Oil meets these standards. Engine problems due

to inadequate lubrication caused by failure to use anSO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD  certified oil,
such as Echo premium Power Blend X 

TM

, will void the two-stroke engine warranty.

IMPORTANT

Echo premium Power BlendX 

TM

 Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo

engines sold in the past regardless of ratio specified in those manuals.

O

PERATION

  

 WARNING

Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is equipped with a
spark arrestor and a spark arrestor may be required.  The operator should contact local fire agencies for laws or
regulations relating to fire prevention requirements.

  

 WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all
openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Blower housing may contain shredder blades
and other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving.
Wear gloves to protect hands from sharp edges and hot surfaces.

Summary of Contents for PB-610





























Reviews: