19
P
OWER
B
LOWER
O
PERATOR
'
S
M
ANUAL
IMPORTANT
To avoid engine damage due to over revving, do not block
blower pipe opening.
1.
Use only during appropriate hours.
2.
Allow the engine to warm up at a fast idle for a few minutes.
3.
Set engine speed with throttle lever (A).
NOTE
The blower can be run at any speed between 2600 rpm to 7600 rpm
once the engine has broken in after approximately 3 fuel tanks of
running time.
4.
Use lower speed to blow dry leaves from a lawn or flower bed.
5.
Additional speed may be necessary to clean grass and leaves from
walks, patios and drives.
6.
Higher speed may be necessary to move gravel, dirt, snow, bottles
or cans from a driveway, street, parking lot or stadium.
NOTE
Never use a higher speed setting than necessary to perform a task.
Remember, the higher the engine speed, the louder the blower noise.
Minimize dust by using blower at lower speeds and by dampening
material with water/mist when necessary. Keep debris on your
property.
Be Smart - be a good neighbor.
A
A
PB-600
PB-601
