18
STARTING
WARM
ENGINE
(PB-600)
1A. Move throttle lever (A) to start/idle detent position.
2.
Pull recoil starter handle (E) and engine should start. Do not use
choke (C).
(PB-601)
1B.
Move throttle lever (A) forward to idle position.
2.
Slide stop switch (B) forward to run position. Pull recoil starter
handle (E) and engine should start. Do not use choke (C).
NOTE
If engine does not start after 5 pulls, use cold start procedures.
STOPPING
ENGINE
(PB-600)
1.
Move throttle lever (A) to idle detent position and allow engine to
idle for a few minutes.
2.
Move throttle lever (A) to "O" (Stop) position.
(PB-601)
1.
Move throttle lever (A) forward to idle position and allow engine
to idle a few minutes.
2.
Move stop switch (B) to "Stop" position.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
OPERATING
BLOWER
WARNING DANGER
Always wear safety glasses, hearing protection, a face filter mask
and take all safety precautions or serious personal injury may result.
Do not point the blower pipe in the direction of people or pets.
Read the Safety Section carefully.
A
A
B
PB-600
PB-601
A
A
B
PB-600
PB-601
