background image

4

Physical Condition 

Your  judgment  and  physical  dexterity  may  not  be  good:                        

•  if you are tired or sick,                       

•  if you are taking medication, 

•  if you have taken alcohol or drugs.

Operate unit only if you are physically and mentally 

well.

Eye Protection 

Wear eye protection that meets ANSI Z87.1 or CE re-

quirements whenever you operate the unit.

Hand Protection

Wear no-slip, heavy-duty work gloves to improve your 

grip on the blower handle.  Gloves also reduce the trans-

mission of machine vibration to your hands.

Breathing Protection

Wear a facemask to protect against dust.

Vibration and Cold 

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be 

brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sen-

sations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, 

because the minimum exposure, which might trigger the ailment, is unknown. 

•  Keep your body warm, especially the head, neck, feet, ankles, 

hands, and wrists.

•  Maintain good blood circulation by performing vigorous arm 

exercises during frequent work breaks, and also by not smoking.

•  Limit the hours of operation. Try to fill each day with jobs where 

operating the unit or other hand-held power equipment is not 

required.

•  If you experience discomfort, redness, and swelling of the fingers 

followed by whitening and loss of feeling, consult your physician 

before further exposing yourself to cold and vibration.

Hearing Protection

ECHO recommends wearing hearing protection whenever 

unit is used.        

Proper Clothing

Wear snug fitting, durable clothing;

•  Pants should have long legs, shirts with long sleeves.

•  DO NOT WEAR SHORTS,

•   DO NOT WEAR TIES, SCARVES, JEWELRY, 

or clothing with loose or hanging items that could 

become entangled in moving parts or surrounding 

growth.

Wear sturdy work shoes with nonskid soles:

•  DO NOT WEAR OPEN TOED SHOES,

•  DO NOT OPERATE UNIT BAREFOOTED.

Wear no-slip, heavy duty work gloves.

Keep long hair away from engine and air intake. Retain 

hair with cap or net.

Hot Humid Weather 

Heavy protective clothing can increase operator fatigue, 

which may lead to heat stroke. Schedule heavy work for 

early morning or late afternoon hours when temperatures 

are cooler.

  

 warning    

The ignition components of this machine generate an electromagnetic field during operation which may interfere 

with some pacemakers.  To reduce the risk of serious or fatal injury, persons with pacemakers should consult with 

their physician and the pacemaker manufacturer before operating this machine.   In the absence of such informa-

tion, ECHO does not recommend the use of ECHO products by anyone who has a pacemaker.

Summary of Contents for PB-500H

































Reviews: