VxD console – Gina24 and Layla24
49
VxD Console – Gina24 and Layla24
This section of the manual only applies if you installed the VxD drivers and are
using Gina24 or Layla24.
A “virtual control surface” application called the Console is included with the VxD
driver. Every time you start Windows you will see it flicker across the screen as it
loads. Then it will minimize itself to the taskbar. The Console allows you to
control the audio I/O and clocking functions of your Echo product, and it brings
these controls to a single easy-to-use location. From the console you can mix the
virtual outputs, control the output levels, select clocks, and adjust input monitoring.
Note:
While this portion of the manual primarily refers to Layla24, the
concepts will be similar for Gina24. Mia/MiaMIDI’s console will be
explained in the next section.
The Console software was automatically installed at the same time that you
installed the VxD driver. If installation was successful, you should see a red capital
letter
L
or
G
for Layla24 or Gina24. The letter(s) will appear in your Windows
taskbar (typically in the bottom right-hand corner of your screen). Double-clicking
on the letter will activate the console program. It should look like this:
VxD console – Gina24 and Layla24
