Echo HCR-151 Operator'S Manual Download Page 9

Page: 9 / 28

EDGE

LIPPER

PERATOR

ANUAL

PECIFICATIONS

SSEMBLY

This model is factory assembled.

MODEL ----------------------------------------------------- HCR-151

Length ------------------------------------------------------- 1060 mm (41.7 in.)

Width -------------------------------------------------------- 240 mm (9.45 in.)

Height ------------------------------------------------------- 200 mm (7.87 in.)

Weight, dry ------------------------------------------------- 4.9 kg (10.8 lb.)

Type of Engine --------------------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine

Displacement ----------------------------------------------- 21.2 cc (1.29 cu.in.)

Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)

Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)

Exhaust System -------------------------------------------- Spark Arrestor Muffler w/catalyst

Carburetor -------------------------------------------------- Zama RB w/purge

Ignition System -------------------------------------------- Flywheel Magneto, Capacitor discharge ignition

Spark Plug -------------------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)

Fuel ---------------------------------------------------------- Mixed Fuel - gasoline and oil

Fuel/Oil Ratio ----------------------------------------------- 50:1 Ratio using ECHO Hi-Performance, two-stroke air cooled

engine oil

Gasoline ----------------------------------------------------- 89 Octane Unleaded. Do not use fuel containing methyl alcohol,

more than 10% ethyl alcohol or 15% MTBE.

Oil ------------------------------------------------------------ ECHO Hi-Performance, two-stroke air cooled engine oil

Fuel Tank Capacity ---------------------------------------- 0.5 lit. (16.9 fl. oz)

Starter System ---------------------------------------------- Automatic Recoil Starter

Clutch ------------------------------------------------------- Centrifugal Type

Gear Case Ratio -------------------------------------------- 5.88:1

Cutter -------------------------------------------------------- Double Edge (Double Reciprocating Blade)

Length ---------------------------------------------------- 490 mm (19.3 in.)

Pitch ------------------------------------------------------- 35 mm (1.4 in.)

Height ----------------------------------------------------- 21 mm (0.83 in.)

Idle Speed (RPM) ------------------------------------------ 2400 - 3200

Wide Open Throttle (RPM) ------------------------------- 9500 - 11,500

Summary of Contents for HCR-151





























Search results

Summary of Contents for HCR-151

Reviews:

Related manuals for HCR-151

Brands by name

Popular brands

Echo HCR-151, Operator'S Manual

Search results

Summary of Contents for HCR-151

Reviews:

Related manuals for HCR-151

Brands by name

Popular brands