background image

14

HEDGE

 

TRIMMING

1. Hold trimmer firmly and squeeze throttle trigger to accelerate engine.

2. Tilt trimmer so cutting teeth are angled slightly toward the hedge or

shrub and proceed to cut.

WARNING  

  DANGER

Never remove hands from unit when blades are moving.

WARNING  

  DANGER

The engine continues running even when the blades have stopped
due to an obstruction. If this occurs, stop the engine, disconnect
ignition cable and remove the obstruction.

M

AINTENANCE

Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance.  To help you decide whether you want to DO-IT-YOURSELF or have
the ECHO Dealer do it, each maintenance task has been graded. If task is not listed, see your ECHO Dealer for repairs.

SKILL

 

LEVELS

Level 1 =

Easy to do. Most required tools come with unit.

Level 2 =

Moderate difficulty. Some specialized tools may be required.

Level 3 =

Experience required. Specialized tools are required. Echo recommends that the unit be returned to your
ECHO dealer for service.

ECHO offers REPOWER

TM

 Maintenance Kits and Parts to make your maintenance job easier. Just below each task

heading are listed the various part numbers required for that task. See your ECHO dealer for these parts.

Summary of Contents for HC-150 - 03-04 1

























Reviews: