GT-225I
OPERATION
X7732274600
23
© 10/2017 ECHO Inc.
ENGLISH
1.
Stop Switch
Move stop switch (A) away from
the STOP position.
2.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
Note: Energy is stored in the
starter spring each time
the handle/rope is pulled.
Generally two to six pulls,
using light pulling force,
will store enough energy
to engage the starter and
spin the engine. Do not pull the rope out to end stop.
3.
Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle with left hand.
Gently pull recoil starter handle/
rope (D) until engine fires.
Note: If engine does not start after 2-3 engine engagements, use
Cold Start Procedure.
Stopping Engine
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
1.
Throttle
A
C
D