background image

G

rass

 T

rimmer

/B

rush

 C

uTTer

29

O

peraTOr

'

s

 m

anual

 

s

pecIfIcatIons

MODEL  ---------------------------------------------------- SRM-280, SRM-280S

Length w/o cutter head ------------------------------------ 1802 mm  (70.94 in.)
Width -------------------------------------------------------- 246 mm  (9.69 in.)
Height ------------------------------------------------------- 349 mm  (13.74 in.)
Weight (dry) w/o Cutter Head  (SRM-280)  ----------- 5.57 kg  (12.3 lb.)
Weight (dry) w/o Cutter Head  (SRM-280S) ----------- 5.50 kg  (12.1 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 34.0 mm (1.34 in.)
Stroke -------------------------------------------------------- 31.0 mm (1.22 in.)
Displacement ----------------------------------------------- 28.1 cc (1.71 cu. in.)
Exhaust ------------------------------------------------------

Spark arrestor muffler or spark arrestor muffler with catalyst

Carburetor--------------------------------------------------- Walbro diaphragm model w/purge pump 
Ignition System -------------------------------------------- Flywheel magneto, capacitor discharge
Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)

Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)

Fuel/Oil Ratio ---------------------------------------------- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and 

J.A.S.O. M345- 

FC/FD, two-stroke, air-cooled engine oil.

Gasoline ----------------------------------------------------- Use 89 Octane unleaded. Do not use fuel containing methyl 

alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use 

alternative fuels such as E-15 or E-85.

Oil ------------------------------------------------------------ Power Blend X 

TM

 Premium Universal 2-Stroke Oil

Fuel Tank Capacity ----------------------------------------

0.64 lit. (21.6 US fl. oz.)

Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch-------------------------------------------------------- Centrifugal Type
Vibration Isolated System -------------------------------- Rubber cushion on engine mount (heavy duty).  Rubber grip on 

front and rear handles

Operating Rod ---------------------------------------------- 25.0 mm aluminum Tube
Drive Shaft (SRM-280) -----------------------------------

6.35 mm (1/4 in.) flexible shaft

Drive Shaft (SRM-280S) --------------------------------- 7.0 mm  hollow  shaft
Gear Case Ratio -------------------------------------------- 1.4:1 Reduction
Rotating Direction -----------------------------------------

Counter Clockwise; viewed from top

Cutter Head -------------------------------------------------

Nylon line head (2-line) with .095 Crossfire™ Line capacity 6m 

(20 ft.) 

Handle ------------------------------------------------------- Front - Loop and Right Rear Handle w/rubber grips
Shoulder Harness ------------------------------------------ Optional
Idle Speed --------------------------------------------------- 2,500 - 3,000 RPM
Clutch Engagement Speed -------------------------------- 3,750 RPM
Wide Open Throttle Speed (W.O.T.)  ------------------- 8,500 -12,000 RPM

Summary of Contents for Grass Trimmer/Brush Cutter SRM-280





































Reviews: