13
S
HRED
'N' V
AC
®
O
PERATOR
'
S
M
ANUAL
STARTING
WARM
ENGINE
1.
Stop Switch
Move stop switch button (A) away from the STOP position.
2.
Throttle Position Lever
Move throttle position lever (B) forward to idle position.
3.
Recoil Starter
Place the blower on a flat, clear area. Firmly grasp throttle grip with
left hand and rapidly pull recoil starter handle/rope (E) until engine
fires.
IMPORTANT
Recoil starter: Use short pulls - only 45 ~ 60 cm (18 ~ 24 in.) of
rope for starting. Do not allow the rope to snap back in. Always
hold the unit firmly.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
STOPPING
ENGINE
1.
Throttle Trigger
Release throttle trigger (F). Move throttle position lever (B)
forward to idle position and allow engine to return to idle before
shutting engine off.
2.
Stop Switch
Move stop switch (A) to "STOP" position.
WARNING
DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
E
B
A
B
A
F
