![background image](http://html1.mh-extra.com/html/echo/ed-2000/ed-2000_operators-manual_3898373013.webp)
11
MAINTENANCE
AIR FILTER
•
Clean before Use.
- Remove air cleaner cover and pull out
air fillter.
- Lightly brush off dust or wash it in water
and detergent.
- Dry completely before putting it back in
place.
Fuel filter
Cap
•
Check periodically.
- The standard spark gap is 0.6 - 0.7 mm
(0.023 - 0.028 in.).
- Correct spark gap if it is wider or narrower
than the standard gap.
- If the electrodes are coated with carbon
deposites replace with a new spark plug.
Do not sandblast to clean.
Remainnig sand will damage engine.
•
Fastening torque = 145 - 155kg-cm (125 -
135 in-lb)
SPARK PLUG
FUEL FILTER
• Check periodically.
- Do not allow dust to enter into fuel tank.
- Clogged filter will cause difficulty in
starting engine or poor engine
parformances.
- Pick up fuel strainer through fuel inlet
port with a piece of steel wire or the like.
- When filter is dirty, replace it.
( .024- .028 in.)
Air filter
Air cleaner cover
IMPORTANT
Do not over tighten plug.
Summary of Contents for ED-2000
Page 2: ...15 ...