![background image](http://html1.mh-extra.com/html/echo/dpb-2600/dpb-2600_operators-manual_3914497018.webp)
16
Before you start
4. When charging is complete, battery LED will remain
GREEN.
5. Verify battery is fully charged by removing battery from
charger, then pressing battery charge status button, and
checking LED display.
One green light indicates that the battery has 0-25%
charge.
Two green lights indicate that the battery has 25-50%
charge.
Three green lights indicate that the battery has 50-75%
charge.
Four green lights indicate that the battery has 75-100%
charge.
6. Disconnect battery charger from power supply.
Fitting and removing the battery
Fitting the battery
1. Release trigger switch and move the cruise control lever
completely forward to the stop position.
2. Make sure power to unit is turned off.
3. Align ridges on battery with groove on blower, and insert bat
-
tery until battery pack latch gets in the complete position.
1. Battery
2. Battery charge status
button
3. LED display
WARNING
The blower will operate when the battery is installed, the power indicator LED is lit. Make sure the blower is properly positioned
to prevent loss of control and possible serious injury.
NOTE
The battery comes partially charged from the factory and needs to be fully charged before first use.
1. Battery
2. Ridge
3. Battery pack latch
1. Complete position
2. Uncompleted position
3. Battery pack latch
4. Battery pack
IMPORTANT
Before using the blower, make sure that battery is set cor
-
rectly with battery pack latch in the complete position.
NOTE
Battery pack latch is in the complete position when battery
pack latch is correctly engaged.
Summary of Contents for DPB-2600
