OPERATION
BRD-2620
24
X7502343001
© 09/2019 ECHO Inc.
Note: For best results, use BRD redefining blade
(provided with unit) ONLY for redefining
existing bed edges. For edging next to
curbs, sidewalks, or other hard surfaces,
remove redefining blade and install ECHO
Approved Premium Power Edger blade. Use
of redefining blade next to hard surfaces,
can lead to premature blade wear.
1.
Always grip throttle handle with
right hand, and support handle
with left hand.
2.
Before using Redefiner, check
the area and remove objects
that could be thrown.
3.
Carefully plan your direction of
travel. Walk outside of bed. Be
aware of curbs or other
obstacles.
4.
Work with body turned toward
engine as shown. Travel in
direction of arrow, pulling rather than pushing unit. Carefully watch bed
edge and direction of travel. Do NOT walk backwards.
Do not walk towards gear case while operating unit with redefining
blade installed, otherwise poor performance or damage to unit could
occur.
5.
When starting to work, run the
engine at full throttle, and lower
the blade gently into the
ground. Travel around
perimeter of bed, allowing the
Redefiner to improve bed's
edge.
6.
Do not force the blade. Move
only as quickly as conditions
will allow. If performance suffers
or engine RPM drops, reduce
walking speed or decrease
blade depth and allow engine
RPM to return to normal before
continuing.
Note: Blade height may need to be adjusted due to differences in
height between the bed and the top of the grass.