Page 14
EMX9090 Plus User's Manual
Repeat Mode
To activate repeat, push and hold the Stop/Menu button. Select
“Repeat” from the menu using the Play/Pause button. Use the
Reverse/Cue buttons to scroll through the various repeat options.
Repeat options include No Repeat, Repeat One, Repeat All and
Repeat Directory. Repeat can be set during playback without af-
fecting the audio.
Recording an MP3
Push and hold the Record button for 2 seconds to start recording.
Recording will begin in pause mode. Push the Play/Pause button
to begin recording. You can push this button again to pause mid-
recording. Push the Stop/Menu button to finalize the recording. Do
not remove your USB media when the screen displays “LOADING”
as the USB recorder is writing your file to the USB drive. Files will
be named REC__001.MP3 where the file number is increased by
1 for each new recording.
Changing the Recording Sample Rate
Push and hold the Record button for 4 to 5 seconds to change the
recording sample rate. When you do so, the two available sample
rates will appear on screen: 128 kHz and 192 kHz. Push the record
button again to swap the sampling rate. Wait a couple of seconds
and the menu will automatically exit.
Deleting a File
Whenever a file is highlighted users can push and hold the Stop/
Menu button for at least 1 second to access the menu. Use the cue
button to scroll down to “DELETE” and push the Play/Pause button
to accept. Press the Play/Pause button again to confirm deletion or
the Stop/Menu button to decline.
