Page 11
EMX9090 Plus
28.
Repeat Control
The Repeat control allows users to add one or more repeats to the
selected effect (up to 10 repeats total).
EFX Processor
26.
Effect Display
These windows display the 16 effects available on the each of the
EMX9090 Plus’ effect processors. The title of the effect will light up
when it is selected.
27.
Speed Control
The Speed Parameter control allows users to adjust the speed or
decay time of the currently selected effect (from the left position,
which is the slowest, to the right, which speeds the effect up).
29.
Effect RTN
The Effect 1 and 2 return controls adjusts the level of the pro-
cessed effect sounds returned from the built-in digital effect pro-
cessors to the Master A, B and C mixes. Effects are in stereo so
left signals will be sent to Master A while right signals will be sent
to Masters B and C.
30.
Program Control
Using the program knob allows users to jump between the different
effects that can be applied to the mix.
31.
Effect On Button
The EFFECT ON button located on the front panel must be pushed in
to use any of the effects. This button will light up when activated. The
footswitch jack can also be used to activate and deactivate effects.
30
29
26
27
28
31
26
27
28
29
30
31
