11
program anytime you add an Echo audio card to your system, even if you
are merely exchanging one card for an identical one (such as during a
warranty exchange). Be sure to restart Windows after you run the
ECHODEL program.
System Sounds
There is one final step to perform before installing the Gina hardware. We
suggest that you turn off your Windows system sounds prior to installing
Gina. Because most system sounds are sampled at very low sample rates,
typically 8 to 11 KHz, each time they are played it will cause the sample
rate clock on Gina to reset to the slower speed
To turn off the system sounds, first go to the Windows
Control Panel
,
which can be found under
Settings
from the
Start
button. On the control
panel you will find an icon titled “
Sounds
”. After double clicking on this
icon, you will see a window labeled “
Schemes
” near the bottom of the
screen. Click on the small down arrow to the right of the combo-box and
select the “
No Sounds
” option. Then click on the Ok button.
