![Echelon i.LON SmartServer Hardware Manual Download Page 6](http://html1.mh-extra.com/html/echelon/i-lon-smartserver/i-lon-smartserver_hardware-manual_3910224006.webp)
vi
Preface
The following table lists the SmartServer model numbers, the features included with the model, and
the power supply used:
Options
IP-852
Routing Programmability Modem
72101R-400 (FT)
72101R-408 (FT)
x
72101R-409 (FT)
x
72101R-410 (FT)
x
x
72102R-400 (FT)
x
72102R-408 (FT)
x
x
72102R-409 (FT)
x
x
72102R-410 (FT)
x
x
x
72103R-400 (PL)
72103R-408 (PL)
x
72103R-409 (PL)
x
72103R-410 (PL)
x
x
72103R-420 (PL)
External coupling
Note
: You can order FPM programmability and IP-852 routing licenses for units that do not have these
options pre-installed.
Box Contents
The
i
.LON SmartServer hardware ships with the following material:
•
i
.LON SmartServer DVD. This DVD contains the Echelon
i
.LON SmartServer software, Echelon
i
.LON Programmability Tools Demo, Echelon
i
.LON Enterprise Services, Adobe
®
Contribute
®
CS3 Trial Edition, Echelon
i
.LON Vision software, Microsoft Internet Explorer 7, and Adobe
Acrobat
®
Reader 8.1.1.
In addition, this DVD contains the installation software for the following support products that are
required to run the
i.
LON SmartServer software: LNS 3 Service Pack 8, Update 2; LonMaker 3.1
Service Pack 3, Update 2, which updates the LNS runtime used by the LonMaker Integration Tool
to the LNS Turbo Edition version; NodeBuilder Resource Editor 3.13, and OpenLDV 3.4.
This DVD also includes Adobe Acrobat PDF files for all the
i.
LON SmartServer documentation
•
i
.LON SmartServer Quick Start Guide. This document describes how to install the
i
.LON
SmartServer software, connect the SmartServer hardware, set the SmartServer IP address, and
select a network management service to run the network attached to your SmartServer.
New Hardware Features
The hardware for the SmartServer version of the
i.
LON has been significantly enhanced. The most
notable improvements are in the unit’s memory. Specifically, the SDRAM has been increased from 32
to 64MB, the NAND flash memory has been increased from 32 to 64MB, and the EEPROM has been
increased from 512 to 2,048 bytes. These improvements support the new standalone and LNS network