Echelon FT 6000, Hardware Manual

Page: 21 / 35

8 R10 4 R20 1 R30
10 T1IN 5 PD 6 PD 0 T2IN FON PD
6 SWSH
7 TEMP
8 RXUSB
9 SW1
10TXUSB 11 LINT
1 PD
9 PD
8 R10 4 R20 1 R30
10 T1IN 5 PD
0 SCL
0 SCL L
1 SDA
1 SDA L 2 LED1 3 LED2
4 SWCLK 5 SWIN
GIZMO
P201
JP204
JP205
JP201 JP203 JP32
JP33
JP202
JP31
JP24
JP206
JP23
IO0 SCL IO0 SCL L
IO1 SDA
IO1 SDA L IO2 LED1
IO3 LED2 IO4 SWCLK
IO5 SWIN
JP31
The following table lists the I/O pins and I/O devices associated with the jumpers on JP31.
Jumper I/O Pin I/O Device/Functionality on FT 6000 EVB
1-2 IO0 SCL LCD
3-4 IO0 SCL L Light sensor
5-6 IO1 SDA LCD
7-8 IO1 SDA L Light sensor
9-10 IO2 LED1
11-12 IO3 LED2
13-14 IO4 SWCLK (Shift register clock for SW2 and Joystick)
15-16 IO5 SWIN (Shift register data in for SW2 and Joystick)
Switch, Joystick, Temperature Sensor, and USB Connections (JP32)
This set of jumpers is used to connect the shift register for the SW2 push button (line 3 of three) and
joystick (SW3), temperature sensor, USB interface, SW1 push button, and I/O pull-downs on the FT
6000 EVB. The 1-2 pins on JP32 are used with the 13-14 and 15-16 pins on JP31 for bitshift I/O with
FT 6000 EVB Hardware Guide 13