ECGMAC EM-301 User Manual Download Page 32

Page: 32 / 66

Press

【

】

in the first page, the second page will be shown as the following figure on the LCD

screen:

Identifier

Name

Description

F1 Lead(F1)

Press

【

】

to enter the lead system and rhythm lead

interface

F2 Display

setup(F2)

Press

【

】

to enter display setup interface

F3 File

(F3)

Press

【

】

to enter file management interface

F4 System

setup(F4)

Press

【

】

to enter system setup interface, refer to

chapter 5,6

F5 More(F5)

Press

【

】

to return to the first page of the main interface

5.3 Operation mode

This ECG has three operation modes: Manual mode, AUTO mode and Rhythm mode. Users can

press

【

manual

】

【

automatic

】

【

rhythm

】

button to select.

Manual mode: under manual mode, users can select lead group need to be recorded. When the users

need to record another ECG lead group, manual switch is required.

AUTO mode: under auto mode, the lead groups switch automatically. When one group’s ECG is

recorded within the period of time which defaulted by system, it will automatically switch to the

next group and start recording the waveforms from it.

Summary of Contents for EM-301



































































Search results

Summary of Contents for EM-301

Reviews:

Brands by name

Popular brands

ECGMAC EM-301, User Manual

Search results

Summary of Contents for EM-301

Reviews:

Brands by name

Popular brands